Sharp MX-2300N ユーザーガイド
43
3
Lower the staple case release lever and
remove the staple case.
remove the staple case.
Pull the staple case out to the right.
4
Raise the lever at the front end of the
staple case and remove the jammed
staple.
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
staple jam will occur again.
5
Lower the lever at the front end of the
staple case.
staple case.
6
Replace the staple case.
Push the staple case in until it clicks into place.
7
Slide the finisher back to the right.
Gently slide the finisher back to the right until it locks into its
original position.
original position.
8
Close the cover.