Sharp MX-2300N ユーザーガイド

The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce 
pollution and conserve natural resources. Touch the [Energy Save] key and configure the settings.

Toner Save mode can be enabled to reduce toner 
consumption when printing. This setting is only effective 
for printing that does not use the printer driver. When the 
printer driver is used, the printer driver setting takes 
precedence.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This setting is used to save toner in copy mode. This 
setting functions the same way as toner save in printer 
mode.

This setting enables or disables Auto Power Shut-Off. To 
disable Auto Power Shut-Off, touch the checkbox so that 
a checkmark does not appear 

 and touch the [OK] 

key. Remove the checkmark if you prefer that Auto 
Power Shut-Off does not operate.

When the set duration of time elapses after printing 
ends, Auto Power Shut-Off activates and causes to 
machine to go on standby at a minimal level of power 
consumption.
This function reduces your power costs, and at the same 
time helps conserve natural resources and reduce 
pollution.
If you prefer that auto power shut-off activates as little as 
possible, it is recommended that you try lengthening the 
time setting after which activation takes place rather than 
disabling the function altogether. (The time setting for 
activation of Auto Power Shut-Off is selected using the 
following "

" setting.)

The time until Auto Power Shut-Off activates can be set 
to any number of minutes from 1 to 240.
Specify the time with the 

 keys and touch the 

[OK] key. (To make the number change quickly, keep 
your finger on the 

 or 

 key.)

Select the time that best suits your workplace needs.

The time until Preheat Mode activates can be set to any 
number of minutes from 1 to 240.
Specify the time with the 

 keys and touch the 

[OK] key. (To make the number change quickly, keep 
your finger on the 

 or 

 key.)

Preheat Mode will activate when the duration of time 
specified with this setting elapses after printing ends and 
no further operations are performed. This function 
reduces your power costs, and at the same time helps 
conserve natural resources and reduce pollution.
Select the time that best suits your workplace needs.

This setting may not operate in some applications and 
operating systems.

Print data

Example of 

printing in 

toner save 

mode

The timer setting will not be effective if Auto Power 
Shut-Off is disabled using the "

" 

setting.

Preheat mode cannot be disabled.