Sharp MX-5500N 操作ガイド

Follow the steps below to send a scanned image to a commercially available USB memory device that has been 
connected to the machine. This stores the file in the USB device.

• Consult your dealer or retailer for USB memory devices that can be used.

• When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot 

be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below.

Do not place any objects under the original size detector. 
Closing the automatic document feeder with an object 
underneath may damage the original size detector plate and 
prevent correct detection of the document size.

• When placing the originals, orient them as shown below.

* To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the 

placement orientation in step 4.

• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (

). If placed in landscape (horizontal) orientation 

(

), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually.

• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and 

sent in a single transmission.

Original size 
detector

1

1

1

1

1

1

Place the original face up.

Portrait orientation*

Landscape orientation

Place the original face down and align the 
corner with the tip of the arrow mark 

 in the 

top left corner of the document glass scale.