Sharp MX-5500N 操作ガイド

This function lets you specify a time at which a transmission or broadcast transmission will automatically take place. 
Transmission begins automatically at the specified time.

• When a timer transmission is stored, keep the main power switch in the "on" position. If the main power switch is in the "off" 

position at the specified time, transmission will not take place.

• When performing a timer transmission, you must scan the original into memory when you set up the transmission. It is not 

possible to leave the document in the auto document feeder or on the document glass and have it scanned at the specified 
time of transmission.

• Settings selected for a timer transmission (exposure, resolution, special modes, etc.) are automatically cleared after the 

transmission is finished. (However, when the document filing function is used, the scanned original and settings are stored 
on the built-in hard drive. For more information on the document filing function, see the Document Filing Guide.)

• This function cannot be used in USB memory mode.

Place the original face up in the document feeder tray, or face down on the document glass.

☞

 (page 70)

Set a transmission to 
take place at 20:00

At 20:00, the transmission 
begins automatically