Sharp MX-5500N 操作ガイド

The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS 
application. To configure the settings, touch the [Printer Condition Settings] key.

The default settings are used to set advanced print conditions for printing in an environment where the print driver is not 
used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed). 

*1 When a saddle stitch finisher or finisher is installed.
*2 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other 

specialized uses, there is normally no need to change this setting. Information on the selections is shown in 
"

" (page 25).

*3 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function 

may not take effect with some print methods.)

*4 Only effective when printing PDF, JPEG, and TIFF files.

When printing using the printer driver, the printer driver settings take precedence over the printer condition settings.

Copies

1 - 999 sets

Orientation

• Portrait
• Horizontal

Default Paper Size

11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", A3, 
B4, A4, B5, A5, 8k, 16k

Default Output Tray

• Center  Tray
• Finisher Upper Tray / Finisher Lower Tray*

1

• Right Tray

Default Paper Type

Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper, Color

Line Thickness*

2

0-9

2-Sided Print

• 1-Sided
• 2-Sided (Book)
• 2-Sided (Tablet)

Color Mode

• Color
• Black & White

N-Up Print*

3

• 1-Up
• 2-Up
• 4-Up

Fit To Page*

4

•

 (Use Fit to Page)

•

 (Do not use Fit to Page)