Sharp MX-5500N 操作ガイド

To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions 
that can be selected are sort, group, offset, staple sort, saddle stitch, and punch. All explanations of the settings below 
assume that a saddle stitch finisher is installed.

Output is delivered to the offset tray. The [Offset Tray] 
key is automatically selected when the [Staple Sort] key 
is selected.
* When a finisher or saddle stitch finisher is not installed, 

this key is the [Center Tray] key. In this case, the offset 
function cannot be used.

This is used to offset each set of output from the previous 
set.
The offset function operates when the checkbox is 
selected 

 and does not operate when the checkbox is 

not selected 

. (The offset checkmark is automatically 

cleared when the staple sort function is selected.)

☞

This is used to sort (collate) output into sets.

☞

 (page 38)

This is used to sort output into sets, staple each set, and 
deliver the sets to the tray. (Note that the sets will not be 
offset in the output tray.) When this function is selected, 
three keys will appear for selecting the staple position.

☞

 (page 39)

This is used to group copies by page.

☞

 (page 38)

An icon will appear to indicate the output mode.

Select this key to have output delivered to the right tray.
When the right tray is selected, offset, staple sort, saddle 
stitch, and punch cannot be selected.

Touch this key to close the output screen and return to 
the base screen.

This is used to staple and fold each set of copies at the 
centerline.

☞

 (page 39)

When this key is touched, the saddle stitch setting screen 
appears. (Only when "Automatic Saddle Stitch" is 
enabled in the system settings (administrator).)

This is used to punch holes in the output.

☞

 (page 40)

OK

Output

Sort

Right Tray

Offset

Offset

Tray

Staple
Sort

Group

Saddle
Stitch

Punch