Sharp MX-5500N 操作ガイド

ページ / 576
18
USER AUTHENTICATION
When the administrator of the machine has enabled user authentication, either of the two screens shown below will appear. 
If either screen appears, enter the user number or login name and password that you received from the administrator.
When controlled by user number
When controlled by login name and password
(Different items will appear in the screen when LDAP 
authentication is used.)
AUTHENTICATION BY USER NUMBER
The following procedure is used to log in using a user number received from the administrator of the machine.
User Authentication
OK
Admin Login
User Authentication
OK
Login Name
User Name 
Password
Auth to:
Login Locally
1
Enter your user number (5 to 8 digits) 
with the numeric keys.
Each entered digit will be displayed as " ".
2
Touch the [OK] key.
After the entered user number is authenticated, the user count 
screen will appear briefly.
When page limits have been set in "Pages Limit Group List" in 
the system settings (administrator), the number of pages 
remaining will appear. (The remaining number of pages that the 
user can use in each mode (copy, scan, etc.) appears.) The 
amount of time that this screen appears can be changed using 
"Message Time Setting" in the system settings (administrator).
When the user number is an 8-digit number, this step is not necessary. (Login takes place automatically after the user 
number is entered.)
User Authentication
OK
Admin Login
Usage status: used/remaining pages
Black-white : 87,654,321/12,345,678
Full color  : 87,654,321/12,345,678
2-color     : 87,654,321/12,345,678
Single color: 87,654,321/12,345,678