Sharp MX-5500N 操作ガイド

This section explains how to place the original on the document glass.

When a non-standard size original is placed in copy 
mode, see "SPECIFYING THE ORIGINAL SIZE" in the 
Copier Guide.
When a non-standard size original is placed for fax or 
scanner transmission, see "IMAGE SETTINGS" in the 
Facsimile Guide or Scanner Guide.

Standard sizes
11" (height) x 17" (width)
A3: 297 mm (height) x 420 mm (width)
Non-standard sizes
297 mm (height) x 432 mm (width)

Place the original face down in the far left corner of the 
document glass.

The original should always be placed in the far left corner, 
regardless of its size.
Align the top left corner of the original with the tip of the 

 mark.

Do not place any objects under the original size detector.
Closing the automatic document feeder with an object underneath may damage the original size detector and prevent 
correct detection of the original size.

If you are placing a small non-standard size original on the document glass, it is convenient to place a blank sheet of 
8-1/2" x 11" or 5-1/2" x 8-1/2" (A4 or B5) paper on top of the original to facilitate detection of the original size.

Original size 
detector

8-1/2" x 11"R (A4R)

B5R

8-1/2" x 14" (B4)

11" x 17" (A3)

8-1/2" x 11" (A4)

5-1/2" x 8-1/2"

(A5)

B5