Sharp MX-5500N 操作ガイド
51
FINISHER / SADDLE STITCH FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below
to replace the staple cartridge.
to replace the staple cartridge.
Replacing the cartridge in the finisher
1
Open the front cover.
2
Squeeze the green parts of the staple
case and pull the case up and then out.
case and pull the case up and then out.
3
Remove the empty staple cartridge.
Press the lock button to release the staple case cover and then
remove the staple cartridge.
remove the staple cartridge.
When staples remain, the staple cartridge cannot be removed.
4
Insert a new staple cartridge into the
staple case.
staple case.
Push the staple cartridge in until it clicks into place.
Do not remove the seal from the cartridge before inserting the cartridge into the case.