Sharp MX-5500N 操作ガイド

The inserter enables blank sheets or printed sheets to be added to copy and print output as covers or inserts without 
performing printing. The inserter also allows feeding of heavy paper that cannot be fed from the other trays.
Sets of printed paper that have not been stapled or punched can be fed one at a time from the inserter for stapling or 
punching.

☞

 (page 60)

To use the inserter to insert covers or inserts, paper settings for the inserter must be configured in "Paper Tray Settings" 
in the system settings.

Place blank or printed paper here to be inserted.

When loading paper, adjust this guide to the width of the 
paper.

Open this cover to remove a paper misfeed.

Stapling and punching can be performed directly from the 
inserter operation panel without using the machine 
operation panel.

Release the paper guide lock to remove misfed paper.

Special media such as heavy paper up to 61 lbs. (256 g/m

2

), transparency film, tab paper, or thin paper can be loaded in 

the inserter. For detailed information on paper, see the Safety Guide.

To install an inserter, a finisher or saddle stitch finisher is required. To install an inserter on a finisher, a punch module is 
required.