Sharp MX-5500N 操作ガイド

The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce 
pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings.

You can reduce the amount of toner used for printing.

This setting enables or disables Auto Power Shut-Off. 
Remove the checkmark if you prefer that Auto Power 
Shut-Off does not operate.
When the set duration of time elapses after printing 
ends, Auto Power Shut-Off activates and causes to 
machine to go on standby at a minimal level of power 
consumption.
This function reduces your power costs, and at the same 
time helps conserve natural resources and reduce 
pollution.
If you prefer that auto power shut-off activates as little as 
possible, it is recommended that you try lengthening the 
time setting after which activation takes place rather than 
disabling the function altogether. (The time setting is 
changed using "

The time until Auto Power Shut-Off activates can be set 
to any number of minutes from 1 to 240.
Select the time that best suits your workplace needs.

The time until Preheat Mode activates can be set to any 
number of minutes from 1 to 240.
Preheat Mode will activate when the set duration of time 
elapses after printing ends and no further operations are 
performed. This function reduces your power costs, and 
at the same time helps conserve natural resources and 
reduce pollution.
Select the time that best suits the needs of your 
workplace.

[Print] in Toner Save Mode is only effective when the 
machine's printer driver is not used. When the printer 
driver is used, the printer driver setting takes 
precedence.
This function may not operate in some applications 
and operating systems.

Print 
data

Print example 
when "Toner 
Save Mode" 
is enabled

The timer setting will not be effective if Auto Power 
Shut-Off is disabled using "

".

Preheat mode cannot be disabled.