Sharp MX-5500N 操作ガイド
79
Activity Report Print Select Setting
This is used to have the Image Sending Activity Report
stored in the machine's memory automatically print at
specified times.
The Image Sending Activity Report can be set to
automatically print each time the number of transactions
reaches 200, and it can also be set to automatically print
at a specified time (once a day only). (The settings can
be simultaneously enabled.)
stored in the machine's memory automatically print at
specified times.
The Image Sending Activity Report can be set to
automatically print each time the number of transactions
reaches 200, and it can also be set to automatically print
at a specified time (once a day only). (The settings can
be simultaneously enabled.)
Body Text Print Select Setting
Image files attached to Internet faxes are normally
printed. This setting can be enabled to also have the
e-mail body text (subject and message) printed.
This setting also applies to printing of the body text of
e-mail messages without file attachments.
printed. This setting can be enabled to also have the
e-mail body text (subject and message) printed.
This setting also applies to printing of the body text of
e-mail messages without file attachments.
Pre-Setting Mail Signature
A signature can be automatically appended to the end of
the body text of e-mail. This is convenient when it is a
corporate policy to append a certain signature at the end
of e-mail.
The mail signature to be appended is configured in the
Web pages. This setting simply enables or disables the
signature.
the body text of e-mail. This is convenient when it is a
corporate policy to append a certain signature at the end
of e-mail.
The mail signature to be appended is configured in the
Web pages. This setting simply enables or disables the
signature.
I-Fax Send Settings are described below.
I-Fax Reception Report On/Off
Setting
Setting
This setting is used to request a reception report when
an Internet fax is sent.
The reception report is returned to the sender address
stored in "
an Internet fax is sent.
The reception report is returned to the sender address
stored in "
I-Fax Reception Report Request
Timeout Setting
Timeout Setting
The duration of time that the machine will wait for a
reception report from the destination machine can be set
by any number from 0 minutes to 240 hours in
increments of 1 minute.
reception report from the destination machine can be set
by any number from 0 minutes to 240 hours in
increments of 1 minute.
Number of Resend Times at
Reception Error
Reception Error
The number of resend attempts when an error message
is received from an I-Fax recipient can be set to any
number from 0 to 15.
is received from an I-Fax recipient can be set to any
number from 0 to 15.
Maximum Size of E-mail
Attachments
Attachments
To prevent the transmission of excessively large image
files by Internet fax, a file size limit can be set from 1 MB
to 10 MB in increments of 1 MB. If the total size of the
image files created by scanning the original exceeds the
limit, the image files are discarded.
If you do not wish to set a limit, select [Unlimited].
files by Internet fax, a file size limit can be set from 1 MB
to 10 MB in increments of 1 MB. If the total size of the
image files created by scanning the original exceeds the
limit, the image files are discarded.
If you do not wish to set a limit, select [Unlimited].
• If you only enable the [Print Daily at Designated
Time] setting
and the number of recorded
transactions exceeds 200 before the specified time,
each new transaction will delete the oldest
transaction (the oldest transaction will not be
printed).
each new transaction will delete the oldest
transaction (the oldest transaction will not be
printed).
• The Image Sending Activity Report can also be
printed manually. See "
"
(page 85) in the system settings (administrator).
A maximum of 5 pages of body text can be printed.
This setting is linked to "
(page 77) in the Scan Settings.
I-Fax Send Settings
This setting is only effective when "
" is enabled.
This setting is only effective when "
" is enabled.
This setting is linked to "
" (page 76) in the Scan Settings.