Sharp MX-M1100 操作ガイド

*1 Only effective when a finisher or saddle stitch finisher is installed.
*2 This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is 

normally no need to change this setting. Information on the selections is shown in "

" (Table below).

*3 Paper sizes that can be used with this function are 11" x 17", 8-1/2" x 14", 8-1/2" x 11", A3, B4, and A4. (This function 

may not take effect with some print methods.)

*4 Only effective when printing PDF, JPEG, and TIFF files.
*5 Can only be selected when [1 Staple at Back] is selected.
*6 Only effective when a punch module is installed on a finisher or saddle stitch finisher.
*7 Can only be selected when a folding unit is installed.

* All lines are the minimum line width.

This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.

When a PS (PostScript) error occurs during PostScript printing, this setting determines whether or not an error notice is 
printed.

0

1

2

3

4

5

6

7

8

9

Minimum 
line width*

50%

75%

90%

95%

100%

105%

110%

125%

150%

PCL Symbol Set Setting

Specify the symbol set used for 
printing.

Select from 35 items.

PCL Font Setting

Use this to select the font used for 
printing.

• Internal Font
• Extended Font

(List of internal fonts when extended fonts are not 
installed.)

PCL Line Feed Code

This setting is used to select how 
the printer responds when a line 
feed command is received.

• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF; LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF; FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF; FF=CR+FF

Wide A4

When this is enabled, 80 
characters per line can be printed 
on A4 size paper using a 10-pitch 
font. (When this setting is 
disabled, up to 78 characters can 
be printed per line.)

•

 (Enabled)

•

 (Disabled)

This setting can be configured when the PS3 expansion kit is installed.