Sharp MX-M1100 操作ガイド

This chapter introduces the peripheral devices that can be used with the machine, explains the names of the output 
devices such as the finisher and saddle stitch finisher, and explains manual finishing, which can be used when an 
inserter is installed.

Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard 
equipment.

(As of April, 2007)

Large capacity tray

MX-LCX6

Additional tray. A maximum of 3500 sheets of paper can be 
loaded in the tray. Requires the multi bypass tray (MX-MFX1).

MX-LCX3N

Additional tray. Supports wide sizes such as 12" x 18" (A3W). Up 
to 3000 sheets can be loaded.
The special bypass tray (MX-MFX1) for the MX-M850 is 
required.

Large capacity trays

MX-LCX4

Additional tray. 
A combined total of 4550 sheets of paper can be loaded in the 
three trays.

MX-LCX5

Additional tray. Supports wide sizes such as 12" x 18" (A3W). 
A combined total of 4000 sheets of paper can be loaded in the 
three trays.

Multi bypass tray

MX-MFX1

Additional tray. A maximum of 100 sheets of paper can be 
loaded in the tray. Requires large capacity trays.

MX-MFX2

Additional tray. A maximum of 500 sheets of paper can be 
loaded in the tray.

Finisher

MX-FNX5

Output device that enables the use of the staple function and 
offset function.
Up to 100 sheets of paper can be stapled.

MX-FNX6

Output device that enables the use of the staple function and 
offset function.
On the special finisher for the MX-M850, up to 50 sheets of 
paper can be loaded.

Saddle stitch finisher

MX-FNX7

Output device that enables use of the staple function, offset 
function and saddle stitch function.
Only for the MX-M850.

Saddle unit

MX-FNX8

Output device that enables the saddle stitch function. Requires 
the finisher (MX-FNX5).