Sharp MX-M1100 操作ガイド
6
This chapter provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1)
Finisher*
This can be used to staple output. The optional punch
module can be installed to punch holes in output.
module can be installed to punch holes in output.
☞
(page 59)
(2)
Saddle unit
*
The output is folded at the center. The saddle stitch
function staples output at the centerline.
function staples output at the centerline.
☞
(page 60)
(3)
Folding unit
*
This folds output.
☞
(4)
Inserter*
Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.
from the machine as covers and inserts.
☞
(5)
Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
sides of 2-sided originals can be automatically scanned.
☞
(page 53)
(6)
Front cover
Open this to remove a paper misfeed from the conveyor
unit or to switch the main power switch on and off.
Open this to remove a paper misfeed from the conveyor
unit or to switch the main power switch on and off.
☞
(7)
Toner cartridge installation cover
Open this cover to replace a toner cartridge.
Open this cover to replace a toner cartridge.
(8)
Operation panel
This is used to select functions and enter the number of
copies.
This is used to select functions and enter the number of
copies.
☞
(page 10)
*Peripheral device.
1
BEFORE USING THE MACHINE
(1)
(2)
(3) (4)
(5)
(8)
(7)
(6)