Sharp MX-M260 ユーザーズマニュアル
134
REPLACING THE TONER CARTRIDGE
To check how much toner remains in the toner cartridge (p.137), hold down the [COPY] key. The amount of toner
remaining will appear in the display. When less than 25% of the toner remains, obtain a new toner cartridge as soon
as possible. When "PREPARE A NEW ONE." appears in the display, the toner cartridge must be prepared. When
"TONER SUPPLY IS LOW." appears in the display, be sure to have a new cartridge on hand for replacement at any
time as little toner remains. When "CHANGE THE TONER CARTRIDGE." appears in the touch panel, the toner
cartridge must be replaced. Follow these steps to replace the cartridge.
remaining will appear in the display. When less than 25% of the toner remains, obtain a new toner cartridge as soon
as possible. When "PREPARE A NEW ONE." appears in the display, the toner cartridge must be prepared. When
"TONER SUPPLY IS LOW." appears in the display, be sure to have a new cartridge on hand for replacement at any
time as little toner remains. When "CHANGE THE TONER CARTRIDGE." appears in the touch panel, the toner
cartridge must be replaced. Follow these steps to replace the cartridge.
1
Press gently on both sides of the front
cover and pull it open.
cover and pull it open.
2
Pull the toner cartridge out while
pressing the lock release lever.
pressing the lock release lever.
When pulling out the
toner cartridge, place
your other hand on the
green part of the
cartridge.
toner cartridge, place
your other hand on the
green part of the
cartridge.
3
Remove the new toner cartridge from
the bag. Grasp both ends of the
cartridge and shake it horizontally
about 4 or 5 times.
the bag. Grasp both ends of the
cartridge and shake it horizontally
about 4 or 5 times.
4
While holding down the lock release
lever, insert along guides inside the
machine until the cartridge locks into
place.
lever, insert along guides inside the
machine until the cartridge locks into
place.
5
Close the front cover.
• Do not throw the toner cartridge into a fire. Toner may fly and cause burns.
• Store toner cartridges out of the reach of small children.
• Store toner cartridges out of the reach of small children.
When running long copy jobs or copying originals with many areas of solid black, "TONER REPLENISHMENT IN
PROGRESS." may appear in the touch panel and copying may stop even though the cartridge still has toner.
When this occurs, the toner is being replenished. Replenishment will last about two minutes. When toner
replenishment finishes, copying resumes.
PROGRESS." may appear in the touch panel and copying may stop even though the cartridge still has toner.
When this occurs, the toner is being replenished. Replenishment will last about two minutes. When toner
replenishment finishes, copying resumes.
Caution
Note
• After removing the toner cartridge, do not
shake it or tap it. Doing so may cause
toner to leak from the cartridge.
toner to leak from the cartridge.
• Dispose of the old toner cartridge in
accordance with local regulations.
Toner cartridge
lock release lever
lock release lever
Note
If dirt or dust adheres to the toner cartridge,
remove it before installing the cartridge.
remove it before installing the cartridge.
Note
07.fm 134 ページ ２００９年７月８日 水曜日 午後４時４１分