Sharp MX-M260 ユーザーズマニュアル
31
2
REDUCTION/ENLARGEMENT/ZOOM
There are three ways to enlarge and reduce copies:
● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)
● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)
● Specifying a ratio with the reduce key, enlarge key, or zoom key..................MANUAL RATIO SELECTION (p.32)
● Separately selecting vertical and horizontal ratios ........................................................... XY ZOOM copying (p.33)
Ratios that can be selected vary depending on the following conditions:
Ratios that can be selected vary depending on the following conditions:
AUTOMATIC RATIO SELECTION
The ratio is automatically selected based on the original size and paper size.
1
Place the original(s). (p.23, p.24)
The original size appears in the touch panel.
2
Touch the [PAPER SELECT] key and
then select the desired paper size.
then select the desired paper size.
The selected key is
highlighted and the paper
selection screen closes.
highlighted and the paper
selection screen closes.
3
Touch the [AUTO IMAGE] key.
A suitable ratio is
selected based on the
original size and selected
paper size. (The ratio
appears in the touch
panel.)
selected based on the
original size and selected
paper size. (The ratio
appears in the touch
panel.)
4
Select the number of copies and any
other desired settings, and then press
the [START] key (
other desired settings, and then press
the [START] key (
).
Original position
Selectable ratios
Document glass
25 to 400%
RSPF
50 to 200%
• If the original size does not appear in the
touch panel, specify the original size
manually. (p.48)
manually. (p.48)
• Automatic ratio selection is not possible if
the original or paper is a non-standard
size.
size.
If paper of the desired size is not loaded in
any of the trays, load paper of the required
size in a paper tray or in the bypass tray.
(p.19)
any of the trays, load paper of the required
size in a paper tray or in the bypass tray.
(p.19)
Note
8½x14
8½x11
PLAIN
RECYCLED
Note
• When automatic ratio selection is
selected, the [AUTO IMAGE] key is
highlighted in the main screen.
highlighted in the main screen.
• If the original and paper are in different
orientations, the image is automatically
rotated to match the paper orientation (for
paper sizes 8-1/2" x 11" (A4) or less).
rotated to match the paper orientation (for
paper sizes 8-1/2" x 11" (A4) or less).
• Rotation of the image can be disabled in the
administrator settings. (See "6. SYSTEM
SETTINGS (ADMINISTRATOR)".)
SETTINGS (ADMINISTRATOR)".)
• If "IMAGE IS LARGER THAN THE COPY
PAPER." appears in the touch panel, part
of the image will be cut off in the copy.
of the image will be cut off in the copy.
To cancel automatic ratio selection, touch
the [AUTO IMAGE] key. Automatic ratio
selection also turns off automatically when
the enlargement key, the reduction key, or a
[ZOOM] key
the [AUTO IMAGE] key. Automatic ratio
selection also turns off automatically when
the enlargement key, the reduction key, or a
[ZOOM] key
(
/
)
is touched to allow
the ratio to be selected.
Note
UT
LOGOUT
Note
MX-M310.book 31 ページ ２００９年７月６日 月曜日 午後６時５７分