Sharp MX-M260 ユーザーズマニュアル

This function collates the copies, staples each set, and delivers the sets to the offset tray. The staple sort function 
can only be used when a finisher is installed.

Insert the originals face up.

Place each original face down.

When copying 8-1/2" x 14" or 11" x 17" (B4 or A3) vertically oriented originals, the copies will be stapled at the 
position shown below.

Top left corner

Available paper sizes:
8-1/2" x 11" (A4, B5)
Stapling capacity:
For each size, up to 50 sheets 
can be stapled.

Available paper sizes: 
11" x 17", 8-1/2" x 14", 
8-1/2" x 13", 8-1/2" x 11" R 
(A3, B4, A4R, B5R)
Stapling capacity: 
11" x 17", 8-1/2" x 14", 
8-1/2" x 13" (A3, B4)
For each size, up to 30 sheets 
can be stapled.
8-1/2" x 11"R, (A4R, B5R)
For each size, up to 50 sheets 
can be stapled.

Stapling position

Stapling position

• When using letterhead paper in the staple sort,  load the paper with the letterhead to 

the front or to the right as shown in the diagram.

• When the staple sort is used, the automatic original image rotation function does not operate.
• Different sized originals cannot be copied on the corresponding sizes of paper.
• The staple sort function cannot be used if disabled in the administrator settings. (See "6. SYSTEM SETTINGS 

(ADMINISTRATOR).)

• The offset function (p.36) cannot be used.

Stapling position

Stapling position

SHARP

SHARP

03.fm  38 ページ  ２００９年７月８日　水曜日　午後２時４分