Sharp lc-26d40u 操作ガイド

Removing the stand

Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.

CAUTION

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being

damaged.

Setting the TV on the wall

CAUTION

• Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers

should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.

Using an optional bracket to mount the TV
• You can ask a qualifi ed service professional about using an optional AN-26AG1 bracket for LC-26D40U or AN-

37AG2 bracket for LC-32D40U to mount the TV to the wall.

• Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall
Wall mount bracket. (See the bracket instructions for details.)

Vertical mounting

About setting the TV angle

Unfasten the four screws used to secure the stand in
place.

Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of the
base area.)

Appendix

NOTE

• To attach the stand, perform the above steps in reverse order.

Angular mounting

Selected

item

Up to 20°

Up to 10°

LC-26D40U

LC-32D40U

Angle of TV

hex key

NOTE

• Detach the cable clamp on the rear of the TV when using the optional mount bracket.

Soft cushion

3Y10101A.indb 39

2006/01/19 20:30:41