Crown xti6002 仕様ガイド

he XTi Series of Crown

®

 amplifi ers are 

   professional tools designed and built for 
   portable PA applications. The series 

includes four models which are similar except 
for output power: XTi 1000, 2000, 4000 and 
6000. All are rugged and lightweight, and offer 
unmatched value in their class.

XTi-Series amplifi ers feature an LCD screen 
with speaker presets for crossover frequen-
cies, EQ, limiting, delay, and a subharmonic 
synthesizer. Other features include a switch-
mode universal power supply, useful function 
indicators, proportional-speed fan-assisted 
cooling, XLR inputs, Speakon

®

 and bind-

ing-post outputs, short-circuit protection and 
more.

With their powerful, reliable performance, 
XTi-Series amps easily handle 2-ohm loads 
and are capable of chest-thumping lows. Plus, 
your investment in an XTi-Series amplifi er is 
backed by Crown’s Three-Year, No-Fault, Fully 
Transferable Warranty.

For more details about the Crown XTi Series, 
contact the Crown Technical Support Group at 
800-342-6939 or 574-294-8200. Also, visit the 
Crown Audio website at www.crownaudio.com.

Output Power: See power charts below.

XTi 1000: 30.5 dB 
XTi 2000: 32.9 dB
XTi 4000: 34.2 dB
XTi 6000: 37.1 dB

Frequency Response: +0/–1 dB from 20 Hz to 
20 kHz at 1 watt into 4 ohms.

Load Impedance: Safe with all types of loads. 
Rated for 2 to 8 ohms in Stereo mode, 4 to 16 
ohms in Bridge-Mono mode. The XTi 1000 A1 
(100V version) is rated for 4 to 8 ohms Stereo, 
8 to 16 ohms Bridge Mono.

Sensitivity: 1.4V

Signal to Noise Ratio (below rated 1 kHz 
power at 8 ohms): XTi 1K, 2K, 4K: 100 dB (A 
weighted). XTi 6K: 103 dB (A weighted).

Damping Factor: Better than 500 from 20 Hz  
to 400 Hz.

Crosstalk: > 70 dB below rated power, 20 Hz 
to 1 kHz.

Input Stage: Input is electronically balanced 
and employs precision 1% resistors.

Input Impedance (nominal): 20 k ohms, bal-
anced;10 k ohms, unbalanced.

Maximum Input Signal: +22 dBu typical.

AC Line Voltage and Frequency Confi gura-
tions Available: 100V, 120V, 220-240V  
50/60 Hz.   

AC Line Current (120VAC amplifi er playing 1/8 
power pink noise into 4 ohms per ch):
XTi 1000: 6.8A, XTi 2000: 8.3A, XTi 4000: 
10.5A; at idle draws no more than 38 watts.

XTi 6000: 15.3A; at idle draws no more than 
180 watts.

Operating Temperature: 0° C to 40° C at 95% 
relative humidity (non-condensing). 

•  Integrated speaker presets with LCD front 

panel display

•  Accurate, uncolored sound with very low 

distortion for the best in music and voice re-
production

•  Advanced protection circuitry guards against: 

shorted outputs, open circuits, DC, mis-
matched loads, general overheating, high-fre-
quency overloads and internal faults

•  Extremely versatile, handling a wide range of 

speaker impedances and outputs

•  Switch-mode universal power supply

•  Speaker presets for crossover frequencies, EQ, 

limiting, and delay

•  All products fi ll 2U rack spaces and weigh under 

19 lb (24 lb for XTi 6000); weight sets a new 
standard in lightweight amps

• Speakon

®

 and binding post outputs, XLR inputs 

and loop-thrus

•  Comprehensive LED status per channel

•  Three-Year, No-Fault, Fully Transferable War-

ranty completely protects your investment and 
guarantees its specifi cations

8 ohm Stereo (per channel) 
 
 
 
 
 

1 kHz  
Power 

4 ohm Bridge-Mono 
 
 

8 ohm Bridge-Mono

2 ohm Stereo (per channel) 
 
 

4 ohm Stereo (per channel) 
 

*With 1% THD.

 

  

 
  With 0.5% THD.

8 ohm Stereo (per channel)

1 kHz  
Power 

4 ohm Bridge-Mono 
 
 

8 ohm Bridge-Mono

2 ohm Stereo (per channel)

4 ohm Stereo (per channel) 
 

*With 1% THD.

 

  With 0.5% THD.

8 ohm Stereo (per channel)

1 kHz 
Power

4 ohm Bridge-Mono

8 ohm Bridge-Mono

4 ohm Stereo (per channel)

*With 1% THD.

 

  With 0.5% THD.

2 ohm Stereo (per channel)

†Not rated for 100V versions.

8 ohm Stereo (per channel)

1 kHz  
Power 

4 ohm Bridge-Mono 
 
 

8 ohm Bridge-Mono

2 ohm Stereo (per channel)

4 ohm Stereo (per channel) 
 

*With 1% THD.

 

  With 0.5% THD.