Crown 2x1100 ユーザーガイド

18

Stereo
Measured per channel, both channels driven at 1kHz to no more than 0.1% THD+N
8 ohms

330W rms*

* Note: 2 ohm spec is at 1% THD

Bridged Mono
16 ohms

* Note: 4 ohm bridged spec is at 1% THD

+1dBu for full output

1/4-inch TRS balanced phone jack and female XLR

<0.006% THD, 1kHz, 1dB below clip, 22kHz measurement bandwidth

20Hz to 20kHz, +0/-0.2dB; <2Hz to >120kHz +0/-3dB

Power switch, bridge mode switches, indented level controls (these may be made
tamper-proof)

AC Present, Operate, Signal, Bridge, Clip, Temp., Fault

Microprocessor supervised: Over-temperature, DC on outputs, output stage
overload, inrush current surge, power fail and brownout

<-100dB ref. full output 20Hz - 20kHz measurement bandwidth

>200 ref. 8 ohm

Binding post or Speakon

®

 options

230 volts AC nominal, 2200VA, all channels driven