Jet 756151 wh-45t - 45" english wheel ユーザーガイド
11
Adjustments
When changing tools, making
adjustments, or doing clean-up and maint-
enance, always turn the machine off and
unplug the machine from its power source.
enance, always turn the machine off and
unplug the machine from its power source.
Fence Assembly Movement
Referring to Figure 4:
The adjustment controls of the fence assembly
are as follows:
are as follows:
A – Fence Assembly Lock Knob – to secure fence
assembly to table
B – Lock Knob – to secure the outfeed fence
C – Outfeed Ram Adjust – fine forward/backward
adjustment for outfeed fence
D – Lock Knob – loosening permits side to side
adjustment of infeed or outfeed fence
E – Lock Knob – loosening permits vertical
adjustment of guard (F)
G – Lock Knob – loosening permits
backward/forward adjustment of guard (F)
Handwheel
The handwheel controls the spindle height.
Spindle height
Referring to Figure 5:
1. Loosen
the
lock knob (A).
2. Turn the handwheel (B) clockwise to raise
and counterclockwise to lower the spindle
(C).
(C).
3. Tighten
the
lock knob (A).
Figure 4
Figure 5