Jet horizontal wet band saw - 7" x 12" - 3 ユーザーガイド
4
Cutting capacity
Blade speeds
Blade drive
Blade drive
Motor
Blade guides
Blade guides
Blade size
Blade wheels
Dimensions (LWH)
Weight
Wet cutting package
Blade wheels
Dimensions (LWH)
Weight
Wet cutting package
General
Specifications
Specifications
The JET Models J-3410 and J-3410-2 cut-off band
saws are designed for high production cut-off work. Four
cutting speeds and a hydraulic feed control allows the effi-
cient cutting of virtually any material.
cutting speeds and a hydraulic feed control allows the effi-
cient cutting of virtually any material.
A removable table also allows the saw to function as
a vertical band saw.
7 in. (178mm) round bar stock or tubing
9 1/2 in. wide x 7 in. high (240 x 178mm) rectangular stock
12 in. wide x 1 in. high (305 x 25.4mm) flat stock
3 3/4 in. wide x 6 in. high (95.3 x 150mm) at 45 degree angle
9 1/2 in. wide x 7 in. high (240 x 178mm) rectangular stock
12 in. wide x 1 in. high (305 x 25.4mm) flat stock
3 3/4 in. wide x 6 in. high (95.3 x 150mm) at 45 degree angle
The J-3410 and J-3410-2 come equipped with a cool-
ant system which can greatly extend blade life and speed
the cutting of a variety of materials which are best cut with
cutting fluids and coolants.
the cutting of a variety of materials which are best cut with
cutting fluids and coolants.
1 gallon (4.4L) capacity tank with 3GPM (13L/M) pump -- Optional wet kit
Part No. 5635500 includes tank with baffle, pump 120V/240V, hoses,
flexible nozzle, shut-off valve and required electrics. This kit is delivered
installed on Model J-3410 saws.
Part No. 5635500 includes tank with baffle, pump 120V/240V, hoses,
flexible nozzle, shut-off valve and required electrics. This kit is delivered
installed on Model J-3410 saws.
80, 130, 180 and 265 SFM -- belt selectable
Heat treated steel worm pinion driving a bronze
worm ring gear in an oil bath
3/4 HP, 1725 RPM, 115/230V, single phase, capacitor start
Side: Eccentric shaft with sealed ball bearings
Rear: Sealed ball bearing
3/4 x .033 x 93 in.
11 7/16 in. (280.56mm) diameter flanged cast iron
50 x 18 x 41 in. (1270 x 457 x 1041mm) in lowered position
275 lbs. (125kg)
worm ring gear in an oil bath
3/4 HP, 1725 RPM, 115/230V, single phase, capacitor start
Side: Eccentric shaft with sealed ball bearings
Rear: Sealed ball bearing
3/4 x .033 x 93 in.
11 7/16 in. (280.56mm) diameter flanged cast iron
50 x 18 x 41 in. (1270 x 457 x 1041mm) in lowered position
275 lbs. (125kg)
Specifications:
9 1/2 x 10 in. (241 x 254mm)
Vertical saw operation
Table size (LW)
Table size (LW)
Model
Stock Number
J-3410
414454
J-3410-2
414455