Maytag mvwb455yq ユーザーガイド

Once you select a cycle, the default settings for that cycle  

will be lit. Press the cycle modifiers buttons to change  

the Wash Temp/Rinse Temp, Soil Level, and Spin Speed,  

if desired.  
NOTE: Always read and follow fabric care labels instructions  

to avoid damage to your garments.

Turn cycle knob to choose your wash  

cycle. The indicator for Estimated Time Remaining will light up 

with a cycle time. For more information, see “Control Panel”. 

Press the START/Pause button to start the wash cycle.   

When the cycle has finished, the DONE indicator will light  

and the end of cycle signal will sound (if set). Promptly remove  

garments after cycle has completed to avoid odor, reduce 

wrinkling, and rusting of metal hooks, zippers, and snaps.

If you need to open the lid to add 1 or 2 missed garments: 

Press START/Pause; the lid will unlock once the washer  

movement has stopped. This may take several minutes  

if the load was spinning at high speed. Then close lid  

and press START/Pause again to restart the cycle.
If lid is left open for more than 10 minutes, the water  

will pump out. 

Select any other cycle options you may wish to add, if not 

previously set. Some cycles will automatically add certain  

options such as Fabric Softener or Extra Rinse. These can  

be turned off, if desired.
NOTE: Not all options are available with all cycles.  

Some cold water is added to save 

energy. This may be cooler than 

your hot water heater setting.

Warm 

Some cold water will be added,  

so this may be cooler than what 

your previous washer provided.

Cool - brights/darks

Warm water is added to assist  

in soil removal and to help 

dissolve detergents.

Cold 

Warm water may be added  

to assist in soil removal  

and to help dissolve detergents.

Make sure the dispenser drawer is closed completely, then  

press POWER/CANCEL to turn on the washer. 

Whites and pastels
Durable garments
Heavy soils

 

Bright colors 
Moderate to light soils

Colors that bleed  

or fade 
Light soils

Dark colors that  

bleed or fade 
Light soils