Electrolux EI30ES55JS ユーザーガイド

adhere to the following cleaning Precautions:

• Allow the oven to cool before cleaning.

• Wear rubber gloves when cleaning any exterior parts of the oven manually.

During the self-cleaning cycle, the outside of the oven can become very hot to the touch. 

DO NOT leave small children unattended near the appliance.

Before cleaning any part of the oven, be sure the oven is turned off or else push 

CANCEL 

 pad. Wait until the oven is cool.

DO NOT use commercial oven cleaners or oven protective coatings in or around any part 

of the self-cleaning oven. DO NOT clean the oven door gasket. The gasket on the oven 

door is essential for a good seal. Care should be taken not to rub, damage or move the 

gasket. DO NOT use any cleaning materials on the gasket. Doing so could damage it. DO 

NOT use aluminum foil to line the oven bottom. This may affect cooking or foil could melt 

and damage the oven surface.

 The health of some birds is extremely sensitive to the fumes given off 

during the self-clean cycle of any wall oven. Move birds to another well ventilated room.

1.  Remove any excess spillovers 

in the oven cavity before starting 

the self-cleaning cycle. To clean, 

use hot soapy water and a cloth. 

Large spillovers can cause smoke 

or a fire when subjected to high 

temperatures. DO NOT allow 

food spills with a high sugar or 

acid content (such as tomatoes, 

sauerkraut, fruit juices or pie filling) 

to remain on the surface as they may 

leave a dull spot even after cleaning.

2.  Clean any soil from the oven frame 

and the door liner (see illustration). 

These areas heat sufficiently during 

a self-clean to burn soil on. Clean 

with hot soapy water. 

3.  Remove the broiler pan and insert, 

all utensils and any foil. These items 

can not withstand high cleaning 

temperatures.

4.  Oven racks and oven rack supports must be removed. If they are not removed the self-

cleaning cycle can not start and Remove Racks  will appear in the display indicating that 

you must remove the racks and racks supports. When the cycle has finished and the 

door can be opened replace the oven rack supports and oven racks.