Electrolux ei23ss55 ユーザーガイド
6
Removing The Doors
Getting through narrow spaces
If your refrigerator will not fit through an entrance area, you can reduce its size by removing the doors.
Check first by measuring the entrance.
Check first by measuring the entrance.
Required Tools
You will need the following tools:
Adjustable
Wrench
Socket
Wrench Set
OR
Phillips Head
™
Tools Necessary:
3/8” Fixed
Wrench
AND
OR
To prepare for removing the doors:
1 Make sure the electrical power cord is
unplugged from the wall outlet.
2 Open both doors and remove the toe grille
(as explained in the Installation Instructions
that came with your appliance).
that came with your appliance).
3 Remove any food from the door shelves.
4 Close the doors.
To remove the refrigerator top hinge
cover:
cover:
1 Remove the three screws from each cover
over the top door hinges.
2 Lift hinge cover straight up and off.
Top Hinge
Cover Rear
Screw
Top Hinge
Cover Front
Screw
Bottom
Hinge
Screw
Top
Hinge
Screw
To remove the refrigerator door:
1 Trace lightly around the door’s top hinge with
a pencil. This makes reinstallation easier.
2 Remove the two screws from the top hinge.
Lift the door off of the bottom hinge and set it
aside.
aside.
Adjustable Hinge (some models)