Argox AS-8000 取り扱いマニュアル
3
Troubleshooting
If the imager can not operate properly, the following checks
should be performed:
1.
should be performed:
1.
The cradle uses an external power supply and the
external power supply has failed, the imager will not
operate. Change the power supply with a known good
power supply and reset the imager.
external power supply has failed, the imager will not
operate. Change the power supply with a known good
power supply and reset the imager.
2.
Verify the interface cable is securely connected to the
host computer. Consult your technical support
personnel or refer to your host system manual to verify
the proper connection for the imager.
host computer. Consult your technical support
personnel or refer to your host system manual to verify
the proper connection for the imager.