Electrolux e32ar75jp オーナーマニュアル

* Refrigerant (used to cool refrigerator 

is circulating throughout the system.

* Refrigerator is not level. It rocks on 

the fl oor when it is moved slightly.

* Floor is uneven or weak.

* Refrigerator is touching the wall.

* Weather is hot and humid, which
  increases internal rate of frost buildup.

* Door is slightly open.

* Door is kept open too long or is
opened too frequently.

* Interior needs to be cleaned.

* Foods with strong odors are in the 

refrigerator.

* Refrigerator is not level. It rocks on 

the fl oor when it is moved slightly.

* Floor is uneven or weak.

* The LED or light bulb is
   burned out.

* No electric current is reaching the
   refrigerator. 

* Control is in Sabbath mode (Sb is 

displayed on control)

* This is normal.

 

* Level the refrigerator. Refer to “LEVELING” in the “FIRST 

STEPS” section.

* Ensure fl oor can adequately support refrigerator. Level the 

refrigerator by putting wood or metal shims under part of 
the refrigerator.

* Re-level refrigerator or move refrigerator slightly. Refer to 

“LEVELING” in the “FIRST STEPS” section.

* This is normal.

* See “DOOR PROBLEMS”.

* Open the door less often.

* Clean interior with sponge, warm water, and baking soda. 

Replace air fi lter.

* Cover the food tightly.

* This condition can force the cabinet out of square and 

misalign the door.  Refer to “LEVELING” in the “FIRST 
STEPS” section.

* Ensure fl oor can adequately support refrigerator. Level the 

refrigerator by putting wood or metal shims under part of 
the refrigerator.

* Follow directions under “LED LIGHTING” in the 

“REFRIGERATOR FEATURES” section.

* See “REFRIGERATOR DOES NOT RUN”.

* Depress TEMP MODE key and CONTROL LOCK key for 3 

seconds.

  Odor In Refrigerator

 

  Handles are secure and tight

 

  Door seals completely to cabinet on all sides

 

  Freezer door is level across the top

 

  Refrigerator is level, side-to-side and 

  front-to-back
 

  Toe grille is properly attached to refrigerator

 

  Cabinet is setting solid on all corners

 

  House power turned on

 

  Refrigerator plugged in

 

  Air Filter is installed

 

  Shipping material removed

 

  Fresh food temperatures set

 

  Crisper humidity controls set

 

  Registration card sent in