Cadco BRC-D1 ユーザーガイド

Congratulations on your purchase of a Cadco Light Duty Portable Buffet Range.

Please read all instructions carefully before use.

IMPORTANT SAFEGUARDS

1. Read all instructions before use.

2. Do not touch hot surfaces! Always use hot pad or pot holder until unit cools.

3. To protect against electrical hazards, do not immerse cord, plug, or range

in water or any other liquid.

4. Close supervision is necessary when any appliance is used by or near

children.

5. Unplug from outlet before cleaning. Allow to cool completely before

putting on or taking off parts.

6. Do not operate any appliance with a damaged cord or plug or, or if the

appliance malfunctions or has been damaged in any manner. Call Factory

Service at 860-738-2500. In Canada call (905) 825-9665.

7. Do not use outdoors.

8. Do not let cord hang over edge of table or counter or touch hot surfaces.

9. Do not use appliance for other than intended use.

10. Do not clean with metal scouring pads. Pieces can break off the pad and

touch electrical parts, creating a shock hazard.

11. A fire may occur if this appliance is covered or touching flammable

material, including curtains, walls, etc., when in operation. To avoid

excessive heat on wall(s) while cooking, always keep a space of at

least 4 between your range and your rear and side walls.

12. Do not use plastic dishes or plastic wraps on heating elements.

SAVE THESE INSTRUCTIONS

IMPORTANT NOTES

1. Your unit is equipped with a grounded, current-carrying plug. This plug

will fit into any 3 pronged outlet. This is a safety feature.

2. Electrical connection must be a proper outlet for the 3 pronged cord.

Before connecting power, make sure the voltage and frequency

correspond to the data plate on the unit.

3. A short power cord is provided to reduce the hazards resulting from

accidents such as tripping, entanglement, etc.

-If a long cord set or extension cord is used:

(A) The marketed electrical rating of the cord set or extension cord should

be at least as great as the electrical rating of the appliance.

(B) The longer cord should be arranoed so that it will not drape over the

countertop or tabletop, where it can be pulled on by children or tripped over

accidentally.

4. When performing any cleaning or maintenance to this unit, be sure to

unplug from power outlet first, and allow to cool.

5. Call Cadco Customer Service at 860-738-2500 with any questions or

service needs.

OPERATING INSTRUCTIONS

1. Avoid letting water or food drop or boil over onto heating element.

If liquids or other foreign material are allowed to drip down through

the element pan and into the housing, the warranty is voided.

2. Signal light, on models so equipped, will come on when range is plugged

into electric outlet.

3. This is a light duty range with a 5-1/2 diameter heating element. As with

all countertop ranges as well as stovetops, the most efficient cooking /

heating will be done when using pans that are closest in diameter to the

heating element. For best results, the pot or pan used should not exceed

the heating element diameter.

4. Be sure your Portable Buffet Range is resting level on countertop. Avoid

using pans that are unstable and easily tipped.

5. To avoid excessive heat on wall(s) while cooking, always keep a space

of at least 4 between your range and your rear and side walls.

6. To avoid harm to your countertop, place range on a wooden cutting board

or hot pad when in use.

CLEANING & MAINTENANCE INSTRUCTIONS

1. Always unplug buffet range from electric outlet and allow to cool before

cleaning. Caution: Heating element may be hot without glowing red. Be

sure elenment is cool before touching.

2. The element hookup configuration has been changed to improve the

longevity of the elements. The current configuration requires a different

procedure to remove the element, if necessary for cleaning. (You may also

clean the elements without removing them by gripping an element at the

point opposite where it goes into the holes in the drip pan and tilting it up.

Do not force it up higher than it will go easily.)

3. To remove an element (Tools needed: pliers and slotted screwdriver;

ONLY qualified service personnel should perform this procedure!):

Be sure range is disconnected from electricity and the element is cool.

Locate the round push nut on the underside of the unit (directly below

the element you want to remove.) You may need to apply pressure to the

underside of the unit next to the push nut in order relieve the pressure that

holds it in place in order to get a grip on it with pliers.

While the pliers are gripping the push nut, use a screwdriver to loosen

and remove the screw in the center of the drip pan.

Pull the element up slightly. There are 2 pieces of rubber sleeve on the

wires attached to the element. Gently slide the rubber sleeves back and

remove the element by detaching the "quick-disconnect" terminal.