Milan e-tbt-hb-0400 仕様ガイド

8

7

NOTE:  0400 Ethernet Pocket Hub Link Integrity cannot be
disabled. All devices connected to the Pocket Hub MUST
have link functions enabled.  

To install the 0400 Ethernet Pocket Hub:

•  Unpack the 0400 Pocket Hub.
•

Connect 10Base5 Cable to the 0400 Pocket Hub.

•

Connect 10BaseT Cable to the 0400 Pocket Hub.

•

Connect the 0400 Pocket Hub to power.

Direction is provided in the pages that follow.

The 0400 Ethernet Pocket Hub packing contents should include the
following:

0400 Pocket Hub

E-TBT-HB-0400

Power Supply Adapter

3518, 3517, 3516, 3515, or 3514, 

(depending upon power configuration 
in country where installed)

User’s Guide

7333

NOTE: Up to one-hundred 10Base5 connections can be made in one
segment.

To connect 10Base5 Cable to Pocket Hub female AUI connector:

1. Locate or build IEEE 802.3 compliant AUI drop cable.

2. Connect AUI drop cable male DB-15 connector to the

Pocket Hub AUI connector.

3. Connect AUI drop cable female DB-15 connector to the AUI

port on a transceiver or media attachment unit (MAU).

To connect 10BaseT Cable to Pocket Hub RJ-45 connectors:

1. Locate or build 10BaseT cables with the following

characteristics:
•

802.3 compliant (See page 14)

•

correct (straight through or crossover) cable configuration

for site installation (See page 6)

•

male RJ-45 plug connectors installed at both cable ends.

2. Connect male RJ-45 plug connector at one end of 10BaseT

cable to Pocket Hub RJ-45 jack connector.

3. Connect male RJ-45 plug connector at other end of 10BaseT

cable to DTE terminal RJ-45 jack connector (using straight
through cable orientation) or to Pocket Hub RJ-45 jack
connector (using crossover cable orientation). NOTE:
Examples are provided in the pages that follow.

net

work

s

TR

ANSITIO

N