Milan t8-fl ユーザーガイド

MULTIMODE
Fiber Optic Cable Recommended:

62.5 / 125 µm multimode fiber

Optional:

100 / 140 µm multimode fiber

85 / 125 µm multimode fiber
50 / 125 µm multimode fiber

Fiber Optic Transmitter Power:

Average: -15 dBm

Fiber Optic Receiver Sensitivity:

Average : -33 dBm

Wavelength:

850nM

Bit error rate:

≤

10-10

Maximum Cable Distance:

2 kilometers (6,600 feet)

ST type connectors

16

This equipment has been tested and found to comply with the limits for a class
A digital device, pursuant to part 15 of the FCC rules.  These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.  This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications.  Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at the user’s own expense.

This digital apparatus does not exceed the Class A limits for radio noise for
digital apparatus set out on the radio interference regulations of the Canadian
Department of Communications.

This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.

©  1998 TRANSITION Networks.
All rights reserved.  No part of this work may be reproduced or used in any
form or by any means – graphic, electronic, or mechanical – without written
permission from TRANSITION Networks.

All registered trademarks and trademarks are the property of their respective
owners.