Philips 17 ユーザーガイド
11
Use of the menus
PICTURE
SOUND
SOUND
FEATURES
INSTALL
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
FORMAT
ROTATION
BLUE MUTE
ACTIVE CTRL
PIP
CLOSED CAP
FORMAT
ROTATION
BLUE MUTE
ACTIVE CTRL
TIMER
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
DISPLAY
START TIME
STOP TIME
CHANNEL
ACTIVATE
DISPLAY
Audio Out
If you have connected the TV’s
If you have connected the TV’s
AUDIO OUTPUT
jacks to the
AUDIO INPUT
jacks on a stereo receiver, see Additional Audio Connections, p. 25, set
AUDIO OUT
to either
VARIABLE
or
FIXED
to determine whether you adjust
the volume at the stereo receiver or at the TV.
Select
VARIABLE
to change the volume at the TV using the TV’s remote
control.
Select
Select
FIXED
to change the volume at the stereo using the stereo’s controls.
Speakers
You might want to connect your own audio system to your TV and to hear
TV programs through your audio hifi system. See Additional Audio
Connections, p. 25.
TV programs through your audio hifi system. See Additional Audio
Connections, p. 25.
Select
SPEAKERS ON
to route audio via the internal TV speakers.
Select
SPEAKERS OFF
to route audio via the external audio system speakers.
Features menu
Timer
Your TV comes with an on screen clock.
During normal operation press the
During normal operation press the
STATUS/EXIT
button to display the clock
on the screen or turn on the timer display in the
TIMER
menu.
The timer feature also allows you to set the timer to switch to a selected
channel at a specific time while you are watching another channel or when
the TV is in standby mode.
Note: The TV’s clock settings may be lost when the TV is unplugged.
channel at a specific time while you are watching another channel or when
the TV is in standby mode.
Note: The TV’s clock settings may be lost when the TV is unplugged.
&
Select
TIMER
in the
FEATURES
menu.
é
Press the cursor right to enter the timer.
Setting the timer
&
Press the cursor right again to enter the
TIME
mode.
é
Press the cursor left/right to select the position you wish to enter.
“
Press the cursor up/down to select the digits for the time or use the digit
buttons.
If you entered an incorrect digit: complete the actual time with arbitrary
numbers, then start again.
buttons.
If you entered an incorrect digit: complete the actual time with arbitrary
numbers, then start again.
‘
Press the
MENU/SELECT
button to return to the timer menu.
Setting Start Time
&
Select
START TIME
with the cursor down.
é
Press the cursor right to enter the
START TIME
mode.
“
Press the cursor left/right to select the position you wish to enter.
‘
Press the cursor up/down to select the digits for the time you want the
program to be switched on or use the digit buttons.
program to be switched on or use the digit buttons.
(
Press the
MENU/SELECT
button to return to the timer menu.
315 2114.1 US 13-07-2001 13:43 Pagina 11