Cisco 4 Port T1/E1 NM NM-CEM-4TE1= ユーザーズマニュアル
製品コード
NM-CEM-4TE1=
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Connecting Cisco CEoIP Network Modules to the
Network
Network
Revised: May 1, 2008, OL-12829-01
This guide describes how to connect Cisco Circuit Emulation Over IP (CEoIP) network modules to your
network. It contains the following sections:
network. It contains the following sections:
•
•
•
•
•
•
•
Cisco CEoIP Network Modules
Cisco CEoIP network modules provide a virtual circuit through an IP network (similar to a leased line).
Transport of data, regardless of the content or structure of the data stream, is entirely transparent to the
destination; bits arriving at one end are delivered unchanged to the destination address.
Transport of data, regardless of the content or structure of the data stream, is entirely transparent to the
destination; bits arriving at one end are delivered unchanged to the destination address.
This chapter provides information on the following two Cisco CEoIP network modules:
•
4-port serial interface network module (NM-CEM-4SER), shown in
•
4-port T1/E1 RJ-48 interface network module (NM-CEM-4TE1), shown in