PRIMERA bravo ユーザーズマニュアル

• Load the

 Input Bin

 (the bin located on the right-hand side

of the Publisher) with 25 blank discs and place the bins on

the mounting pegs. 

• Press the Ink Cartridge Button           to move the Ink 

Cartridge Carrier to the load position and open the ink 

cartridge covers

• Remove each ink cartridge from its packaging 
• Slowly remove the tape covering 

the cartridge's print head, being 

careful to avoid damaging the 

barcode label on the underside of 

the cartridge. 

DO NOT TOUCH THE COPPER AREA!
• Insert the ink cartridges into the carrier, copper end first

and snap the cartridge cover in place. Insert the color 

in the left holder, monochrome black in the right 

cartridge holder.

• Close the Publisher’s front cover.

Step 4: Connecting the FireWire Cable
The black IEEE 1394 FireWire cable carries the data that will be

sent to the recorder when producing discs. If necessary, install

a compatible FireWire board in your PC. Please refer to the

manufacturers instructions for proper installation of the

FireWire board. Connect the 6 Pin FireWire cable included with

your Publisher. Connect the other end to the FireWire board's

output port on your PC.

Color

Black

510141.qxd  10/3/03  1:38 PM  Page 10