POS-X xi3000 クイック設定ガイド
Barcode Scanner Formatting Guide
Phone 1(800) 790-8657 Fax 1(360) 738-3495
Email: sales@pos-x.com Web:
Your new POS-X scanner has been pre-configured to the most common settings found amongst scanners in the US.
If you are integrating this scanner into a pre-existing system, you may need to configure your scanner to replicate the
same formatting used by your previous barcode scanner. Often times extra digits appear or are missing from the front
or end of a barcode number.
If your barcode scanner is not outputting the correct barcode, plug your new scanner into your computer and scan a
barcode into ‘Notepad’. Compare the barcode number you see in Notepad to the barcode with the correct formatting.
If the numbers do not match up, configuration of your scanner will be needed.
To begin configuration, scan ‘Enter Setup’, then the desired effect, then ‘Save’ to complete the process. Repeat
process until desired formatting is achieved. For more formatting options, see included floppy.
If you are integrating this scanner into a pre-existing system, you may need to configure your scanner to replicate the
same formatting used by your previous barcode scanner. Often times extra digits appear or are missing from the front
or end of a barcode number.
If your barcode scanner is not outputting the correct barcode, plug your new scanner into your computer and scan a
barcode into ‘Notepad’. Compare the barcode number you see in Notepad to the barcode with the correct formatting.
If the numbers do not match up, configuration of your scanner will be needed.
To begin configuration, scan ‘Enter Setup’, then the desired effect, then ‘Save’ to complete the process. Repeat
process until desired formatting is achieved. For more formatting options, see included floppy.
ENTER SETUP
EXIT SETUP WITHOUT CHANGES
SAVE
ENABLE AUTO-SENSE MODE:
ENABLE
*
DISABLE
ENABLE CHARACTER DELAY
(Required for USB models only):
(Required for USB models only):
SCAN #1
SCAN #2
SCAN #3
UPC-A FORMATTING (UPCA is the most common barcode found on products – 12 digits long)
CONVERT TO EAN13
(Euro Standard)
(Euro Standard)
0177 ENABLE
0178 DISABLE
*
SYSTEM NUMBER TRANMISSION
(First digit of barcode)
(First digit of barcode)
0193 ENABLE
*
0194 DISABLE
CHECKSUM TRANMISSION
(Last digit of barcode)
(Last digit of barcode)
0185 ENABLE
*
0186 DISABLE
UPC-E FORMATTING (UPCE barcodes are found on a variety of products such as cigarettes & soda cans – 8 digits long)
CONVERT TO UPC-A (Converts the 8 digit
barcode to a 12 digit barcode)
barcode to a 12 digit barcode)
0175 ENABLE
0176 DISABLE
*
SYSTEM NUMBER TRANMISSION
(First digit of barcode)
(First digit of barcode)
0191 ENABLE
0192 DISABLE
*
CHECKSUM TRANMISSION
(Last digit of barcode)
(Last digit of barcode)
0183 ENABLE
*
0184 DISABLE
*
Default setting
www.pos-x.com
- 1 -