CardScan 600c インストール手順
1.
Install the CardScan software on your PC before connecting your scanner. If you do not install the CardScan
software first, Windows will not recognize the scanner.
software first, Windows will not recognize the scanner.
2.
Connect the AC adapter to the scanner. Plug the AC adapter into a power outlet. The scanner light comes on
red, then changes to steady green.
red, then changes to steady green.
3.
Using the included cable, connect the scanner’s USB port to the USB port on your PC.
Connection for AC adapter
States of Scanner Light
ON
Ready
OFF
When scanning or
when disconnected
from AC power
when disconnected
from AC power
Blinking
continuously
continuously
Technical problem
Scanner Light
Card Catcher Open
USB Cable
Connector
Connector
Card Catcher
When open (as shown on the
right), the card catcher collects
scanned cards. When closed,
cards scan through the card
catcher’s slit.
right), the card catcher collects
scanned cards. When closed,
cards scan through the card
catcher’s slit.
You can open the card catcher
by pushing its tab (not shown)
away from the scanner.
by pushing its tab (not shown)
away from the scanner.
To close the card catcher, push its
free edge toward the scanner—
until it clasps.
free edge toward the scanner—
until it clasps.
Slit in Card Catcher
P
reparing Your 600c Scanner
S
etting Up Your CardScan 600c Scanner
1.
Make sure the CardScan software is
installed.
installed.
2.
Make sure your CardScan 600c scanner is
connected to your PC. See “Preparing Your
600c Scanner”.
connected to your PC. See “Preparing Your
600c Scanner”.
3.
Start CardScan. The Scanner Setup screen
of the CardScan Setup Wizard appears.
of the CardScan Setup Wizard appears.
4.
Choose “Yes, my scanner is connected”
then click Next. The Scanner Type screen
appears.
then click Next. The Scanner Type screen
appears.
Choose “CardScan business card scanner”
then click Next. The Detect Scanner screen
appears.
then click Next. The Detect Scanner screen
appears.
5.
Choose “Yes” then click Next. The wizard
detects the CardScan 600c scanner. The
Scanner Detected screen appears.
detects the CardScan 600c scanner. The
Scanner Detected screen appears.
6.
Click Next. The Check for Update screen
appears. If you choose Yes (to check for
updates), follow the directions on the Corex
Product Update and Scanner Software
Update.
appears. If you choose Yes (to check for
updates), follow the directions on the Corex
Product Update and Scanner Software
Update.
7.
Insert the calibration card (or a bright white
card) with the blank side facing up in the
scanner and click Next.
card) with the blank side facing up in the
scanner and click Next.
8.
When the calibration finishes, click OK. The Test
Scanner screen appears.
Scanner screen appears.
9.
Insert a business card flush with the right side of
the scanner tray, with the front side facing up,
and click Scan.
The screen displays the scanned image.
Review the image and practice scanning
various business cards.
the scanner tray, with the front side facing up,
and click Scan.
The screen displays the scanned image.
Review the image and practice scanning
various business cards.
10. After testing, click Next. The Finished screen
appears.
11. Click Close.
Note: After setting up your scanner at installation,
you can return to the wizard any time, for
example, to calibrate or check for updates. To
start the wizard, choose Tools
you can return to the wizard any time, for
example, to calibrate or check for updates. To
start the wizard, choose Tools
→
Scanner Setup
Wizard.
Accuracy
CardScan is optimized for business cards from
Australia, Belgium, Canada, France, Germany,
Sweden, the UK and USA. Results for cards from
other countries may not be as good. To verify contact
names and addresses, choose Cards
Australia, Belgium, Canada, France, Germany,
Sweden, the UK and USA. Results for cards from
other countries may not be as good. To verify contact
names and addresses, choose Cards
→
Check
Details. Also, you can use Edit view to verify and edit
all contact information.
all contact information.
Calibration
Calibration significantly improves your scanner’s
accuracy. You can calibrate the scanner at any time
using:
accuracy. You can calibrate the scanner at any time
using:
•Scanner Setup Wizard
or
•Scan Preferences (see “Changing Scanning
Parameters”)
Changing Scanning Parameters
Initially, your CardScan 600c scanner is set to scan in
color. However, scanning is faster in monochrome
mode. You can switch between scanning modes, and
change other scanning parameters, using Scan
Preferences.
color. However, scanning is faster in monochrome
mode. You can switch between scanning modes, and
change other scanning parameters, using Scan
Preferences.
1.
Choose Edit
→
Preferences and click
on
the Preferences dialog. This dialog appears:
2.
Select the 600c scanner from the list and click
Setup. This dialog appears:
Setup. This dialog appears:
3.
Select the radio button for the desired scanning
mode and click OK.
mode and click OK.
Default: scan
automatically
automatically
Click to
calibrate
calibrate
Select
scanning
mode
scanning
mode
S
canning and Processing
1.
Start
CardScan.
2.
With the front facing up, insert a card flush with
the right side of the scanner’s tray. The
scanner pulls the card through. If you change
preferences to scanning manually,
the right side of the scanner’s tray. The
scanner pulls the card through. If you change
preferences to scanning manually,
click
, on the CardScan Toolbar to scan.
3.
When CardScan finishes scanning, you can:
•
Continue inserting cards
•
Click Batch Options to assign categories and
Notes or
Notes or
•
Process the card(s) by clicking Process.
Processing cards
When CardScan processes a card, it uses
AccuCard™ technology, an optical character
recognition (OCR) technology, to read the digital
image created by your scanner. It then interprets
the information and places it into the correct
labeled fields, such as Name, Title, Company,
Address, Phone, Fax, Email, and so forth. After
processing, the information appears in Edit view for
you to verify its accuracy (see “Accuracy”).
AccuCard™ technology, an optical character
recognition (OCR) technology, to read the digital
image created by your scanner. It then interprets
the information and places it into the correct
labeled fields, such as Name, Title, Company,
Address, Phone, Fax, Email, and so forth. After
processing, the information appears in Edit view for
you to verify its accuracy (see “Accuracy”).