NorthStar 958 ユーザーズマニュアル
Chapter 11 - Alarms, TideTrack, and Video Display
958 Operator’s Manual, Rev. A
Page 153
You can also turn the alarm audio on or off for all of the 958’s
alarms
alarms
.
Alarm audio
You can turn the alarm audio on so that the 958 will beep
when any alarm goes off, or you can turn the audio off
completely so that you’ll only see alarm icons and messages
displayed on the screen:
when any alarm goes off, or you can turn the audio off
completely so that you’ll only see alarm icons and messages
displayed on the screen:
1. Press the CURSOR PAD to select ALARM AUDIO, then
press the EDIT ALARM menu key.
2. Press the CURSOR PAD to display OFF or ON, then press
the ENTER key.
Anchor alarm
The anchor alarm will signal if your vessel moves a certain
distance from the position where you pressed the DROP
ANCHOR key. You can turn the anchor alarm on or off, and set
the anchor drag distance. The default setting is 0.20 nautical
miles (about 1200 feet). You can set the anchor alarm to as
little as .01 nm.
distance from the position where you pressed the DROP
ANCHOR key. You can turn the anchor alarm on or off, and set
the anchor drag distance. The default setting is 0.20 nautical
miles (about 1200 feet). You can set the anchor alarm to as
little as .01 nm.
Note: Turn off the anchor alarm before you intentionally move
away from the anchor-drop point.
away from the anchor-drop point.
To set the anchor alarm:
1. Press the DROP ANCHOR menu key where you’ve
dropped the anchor. A waypoint named ANCR is created
at this location.
at this location.
2. Press the ENTER key at the question window.
3. Press the CURSOR PAD to highlight ANCHOR ALARM,
3. Press the CURSOR PAD to highlight ANCHOR ALARM,
then press the EDIT ALARM menu key.
4. Press the CURSOR PAD to turn the alarm to ON.
5. To set the distance your vessel can normally be expected
5. To set the distance your vessel can normally be expected
to move on its anchor chain, press the CURSOR PAD
right, and use the KEYPAD to enter the distance. Be sure
right, and use the KEYPAD to enter the distance. Be sure