Garmin 2006 オーナーマニュアル

G

ETTING

 S

TARTED

 > 

U

SING

 

THE

 GPSMAP 3006C/3010C K

EYPAD

Use the keypad on the optional Marine Remote Control to operate your  

GPSMAP 3006C/3010C from a distance. Contact your Garmin dealer or Garmin 

Product Support to purchase the Marine Remote Control.
To operate the remote control, point the IR (infrared) window on the remote 

toward the unobstructed IR window on the lower-right corner of the GPSMAP 

3006C/3010C. 
All keys on the remote control operate in the same manner as the keypad on the 

GPSMAP 3006C/3010C. Each key’s primary function appears on the key. To 

activate the secondary functions for the ADJ/MENU, NAV/MOB,  

DATA/CNFG, and Thumb Stick (ENTER/MARK) keys, press and hold the key. 
The Thumb Stick combines the operations of the 

ROCKER and  

ENTER/MARK key. Use it to select menu options, change settings, enter data, 

and confirm entry. You can also control movement of the pointer on the Map 

Page. Press in on the Thumb Stick to select a highlighted item or begin data entry. 

Press and hold the Thumb Stick to mark a waypoint.

The remote requires two AAA alkaline batteries. To install the batteries, press 

down on the battery door clip, and then pull the battery door away from the 

remote. Install the batteries, observing the correct polarity (see the inside of the 

battery compartment). Replace the cover, and make sure it is closed all the way.

  NOTE: The remote is for use in shaded or enclosed environments. Direct 

sunlight interferes with infrared operation. The Marine Remote Control is NOT 

waterproof.

IR window

Thumb Stick