Garmin 2006 オーナーマニュアル

B

ASIC

 O

PERATION

 > 

C

REATING

 

AND

 U

SING

 W

AYPOINTS

The GPSMAP 3006C/3010C stores up to 4,000 alphanumeric waypoints, each 

with a user-defined icon, comment, depth, and water temperature. 

  NOTE: If you are using a Garmin GSD 20, GSD 21 or GSD 22 sounder 

module, the Depth and Water Temp fields fill in automatically.

You can create waypoints using three basic methods:

•  ENTER/MARK—use the ENTER/MARK key to quickly mark your 

current location. 

•  Graphically—use the map display to define a new waypoint location.
•  Manually—enter new waypoint coordinates manually.

Use the ENTER/MARK key to capture your current location (or pointer or map 

item location) to create a new waypoint. You must have a valid position fix to 

mark your current location.

1.  Press and hold 

ENTER/MARK until the Review Waypoint Page appears. 

The GPSMAP 3006C/3010C captures its current location and creates a 

default name and symbol for the new waypoint. 

2.  To accept the waypoint with the default name and symbol, press 

ENTER. 

To change any of the available waypoint information, see page 

You can create a waypoint by using the map pointer to point to any map 

location or map feature. When you move the pointer over a map item, you see a 

highlighted description of the item. 

1.  Use the 

ROCKER to move the pointer to the map location you want. 

2.  Press and quickly release 

ENTER/MARK to capture the pointer location. 

Do not hold the button down; doing so marks your current location, not the 

map location. The Review Waypoint Page appears. 

3.  To accept the waypoint with the default information, press 

ENTER.  

To change any waypoint information, highlight the appropriate field and 

press 

ENTER. After entering your changes, press the OK soft key.