Garmin 2006 オーナーマニュアル

B

ASIC

 O

PERATION

 > 

N

AVIGATING

 

TO

 

A

 D

ESTINATION

Using the NAV key, the GPSMAP 3006C/3010C provides four ways to navigate 

to a destination: Go To Point, Follow Track, TracBack, and Follow Route. 

When you are actively navigating, you see a straight line on the Map Page that 

always runs from your current location to the destination. The easiest method 

for selecting a destination is the Go To function, which allows you to select a 

destination point, and then set a direct course to it from your present location. If 

you highlight a point on a list or the map and press NAV, Go To <point name> 

appears in addition to Go To Point. The Go To function can be accessed from any 

list of points or from the map display.

Destination

Current location

1.  Press 

NAV.

2.  Highlight 

Go To Point, and press ENTER. The Find From Current Position 

Page opens.

3.  Highlight 

Waypoints, and press ENTER. (You can also choose to go to 

other points from this list, such as cities or Tide Stations.)

4.  Select a waypoint, and press 

ENTER to open the Review Waypoint Page 

for the selected waypoint.

5.  Press the 

Go To soft key to begin navigation. A magenta line appears on 

the map display showing the course from your present location to the  

Go To point.

1.  Press 

NAV. 

2.  Highlight 

Stop Navigation, and press ENTER.

A Go To can be used to select one of three items from the map display—an 

existing waypoint, on-screen map items such as rivers, cities, navaids, or a new 

map point. If you select a map item as the Go To destination, the GPSMAP 

3006C/3010C automatically uses the name of the map item, but the point is not 

stored in the waypoint list. If you select a new map point (non-map item) as the 

Go To destination, the GPSMAP 3006C/3010C automatically creates a waypoint 

named MAP at the pointer location.

1.  Use the 

ROCKER to highlight the waypoint or map item to which you want 

to navigate on the Map Page, and press 

NAV.

2.  On the Navigation menu, highlight 

Go To <waypoint name>, and press 

ENTER.