Garmin 2006 オーナーマニュアル

M

AIN

 P

AGES

 > 

V

IDEO

 P

AGE

The Video Page is available only if you attach an optional NTSC (National 

Television System Committee) or PAL (Phase Alternate Line) composite video 

source to the GPSMAP 3006C/3010C (see the GPSMAP 3006C/3010C & GPS 17 

Installation Instructions for more information). You can input up to two different 

video signals to your GPSMAP 3006C/3010C. When attached, you can change or 

alternate between video sources, and adjust the aspect, brightness, saturation, and 

contrast. You can also adjust which video standard is being input.

Use the ADJ key and soft keys to access the following options: Source, Aspect, 

Brightness, Saturation, Contrast, and Standard.

•  Source—select input between Video In 1 and Video In 2. Choose 

Alternate to switch between sources at 5, 10, and 30 second intervals.

•  Aspect—select Stretch to stretch the video input to fill the entire frame, or 

select Standard to show the normal view of the video input.

•  Brightness—affects how bright the overall video input appears on the 

display (0%–100%).

•  Saturation—adjusts the intensity of the colors. High saturation produces 

bright colors, whereas low saturation produces washed out colors.

•  Contrast—adjusts the difference between light and dark areas of the video 

input. The higher the contrast, the brighter the video appears.

•  Standard (ADJ key only)—selects the composite video input standard. 

Choose Auto to have the unit automatically select the Standard. Choose 

NTSC for composite video in NTSC standard or PAL for composite video 

input in PAL standard. If set to Auto and Alternate is selected as the 

Source, you might notice a switching display as the unit determines the 

video input. For best results, set to the specific Standard.