Garmin 2006 オーナーマニュアル

B

ASIC

 O

PERATION

 > 

N

AVIGATING

 

TO

 

A

 D

ESTINATION

Using the NAV key, the GPSMAP 3206/3210 provides four ways to navigate to a 

destination: Go To Point, Follow Track, TracBack, and Follow Route. When you 

are actively navigating, you see a straight line on the Map Page that always runs 

from your current location to the destination. The easiest method for selecting a 

destination is the Go To function, which allows you to select a destination point, 

and then quickly sets a direct course from your present location. If you highlight 

a point on a list or the map and press NAV, Go To <point name> appears in 

addition to Go To Point. The Go To function can be accessed from any list of 

points or from the map display.

Destination

Current location

1.  Press 

NAV.

2.  Highlight 

Go To Point, and press ENTER. The Find From Current Position 

Page opens.

3.  Highlight 

Waypoints, and press ENTER. (You can also choose to go to 

other points from this list, such as cities or tide stations.)

4.  Select a waypoint, and press 

ENTER to open the Review Waypoint Page 

for the selected waypoint.

5.  Press the 

Go To soft key to begin navigation. A magenta line appears on 

the map display showing the course from your present location to the Go 

To point.

1.  Press 

NAV. 

2.  Highlight 

Stop Navigation, and press ENTER.

A Go To can be used to select one of three items from the map: an existing 

waypoint, an on-screen map item such as a river, city, navaid, or a new map 

point. If you select a map item as the Go To destination, the GPSMAP 3206/3210 

automatically uses the name of the map item, but the point is not stored in the 

waypoint list. See page 

items. If you select a new map point (non-map item) as the Go To destination, the 

GPSMAP 3206/3210 automatically creates a waypoint named 

MAP at the pointer 

location.

1.  Use the 

ROCKER to highlight the waypoint or map item you want to 

navigate to on the Map Page, and press 

NAV.

2.  On the Navigation menu, highlight 

Go To <waypoint name>, and press 

ENTER.