Garmin 2006 オーナーマニュアル

B

ASIC

 O

PERATION

 > 

N

AVIGATING

 

TO

 

A

 D

ESTINATION

You must save a track before using the Follow Track option. Otherwise, “There 

are no Saved Tracks to follow” message  appears.

1.  Press 

NAV. The Navigation menu appears.

2.  Highlight 

Follow Track, and press ENTER. The Select Track Page 

appears.

3.  Highlight the track you want to follow, and press 

ENTER.

4.  To invert the Follow Track (navigate it in the reverse direction), press 

NAV, 

highlight 

Invert Route, and press ENTER.

1.  Press 

NAV to open the Navigation menu.

2.  Highlight 

TracBack, and press ENTER. The TracBack Through window 

appears.

3.  Highlight the time, date, or 

Entire Log, and press ENTER.

1.  Press 

NAV.

2.  Highlight 

Stop Navigation, and press ENTER.

When a TracBack is active, the GPSMAP 3206/3210 takes the track log stored 

in memory and divides it into segments called legs. Up to 300 temporary turns 

(BEGIN, TURN 1, TURN 2,...., TURN X, END) are created to mark the most 

significant features of the track log to duplicate your exact path as closely as 

possible. To get the most out of the TracBack feature, remember the following 

tips:

•  Always clear the track log at the starting point.
•  The Record Mode option on the track log setup page must be set to 

Fill or 

Wrap.

•  At least two track log points must be stored in memory to create a 

TracBack route.

•  If the track log Interval field is set to Time, the route may not follow your 

exact path (keep the interval set to Resolution for best performance).

•  If the receiver is turned off or satellite coverage is lost during your trip, 

TracBack draws a straight line between any point where coverage was lost 

and where it resumed.

•  If your track log’s changes in distance and direction are too complex, 

300 waypoints might not mark your path accurately. The receiver then 

assigns the 300 waypoints to the most significant points of your track, and 

simplifies segments with fewer changes in direction.