Garmin 2006 オーナーマニュアル

M

AIN

 M

ENU

 > 

DSC (D

IGITAL

 S

ELECTIVE

 C

ALLING

) T

AB

With a GPSMAP 3206/3210 properly connected to a VHF radio with DSC output, 

you can receive any DSC distress call within range. An alert message appears, 

and an alarm sounds (if enabled) when a distress call is received. The alarm 

sounds only for a distress call; position reports do not sound an alarm. Distress 

calls are broadcasted to all DSC users in radio range and appear with a blue and 

white checkered icon on the DSC tab’s Call List and Log sub tabs.
You can enter a caller’s name, if it is known. The caller’s name replaces the 

MMSI number as a reference, when entered.

The position report operates similarly to the distress call. This type of contact is 

like a phone call; no emergency alarms are set off, and the call is specific to the 

receiver. Position reports are not broadcasted to all DSC users and appear with a 

gold boat icon.

The Call List sub tab shows the 100 most recent calls, even if the unit is left 

unattended. You can select any entry from the Call List to show an Entry Review. 

When DSC calls are received, they are automatically stored in the log, with 

the latest call at the top. The unit can store up to 100 calls; after 100 calls are 

received, the oldest is removed when a new call is received. 
The Call List and Log sub tabs both show the call type, date/time, position, and 

MMSI/name. Pressing the Sort By (Call) Type, Sort By Time, Sort By Name, 

Delete (only after highlighting a particular call), and Delete All soft keys allows 

you to sort and delete calls.

1.   From the 

DSC tab, highlight the Call List or Log sub tab.

2.  Press up or down on the 

ROCKER to highlight the call you want to review.

3.   Press 

ENTER.

The Review DSC Waypoint Page operates similarly to the Distress Page and 

Position Report Page. From this page you can delete the displayed call. On the 

DSC Review Waypoint Page, press the 

Delete soft key to delete the entry, or 

press the Create Wpt soft key to create a waypoint.