Garmin 2006 オーナーマニュアル

M

AIN

 M

ENU

 > 

A

LARMS

 T

AB

Use the System sub tab to set alarms for the system clock, batteries, and GPS 

accuracy.

The System sub tab contains the following alarms:

•  Clock—provides an alarm for the system clock. Enter a time in the time 

field and turn the alarm on and off from the control field menu. Remember 

to enter alarm times in the same time format (UTC or local) you are using 

for your system. The unit must be on for the clock alarm to work.

•  Battery—sets an alarm to sound when the battery reaches a user-

determined low voltage.

•  GPS Accuracy—sets an alarm to sound when the GPS location accuracy 

falls outside the user-determined value.

Use the Nav sub tab to set navigational alarms, including anchor drag, arrival, and 

off course.

•  Anchor Drag—sets an alarm to sound when a specified drift distance is 

exceeded. Enter a value in the distance field, and use the control field to 

turn the alarm on and off.

•  Arrival—sets an alarm to sound when a specified distance or time away 

from a destination waypoint is exceeded. Enter a distance, radius, or time 

for sounding the alarm, and use the control field to set the alarm to Off, 

Dist (distance), or Time. 

•  Off Course—sets an alarm to sound when you are off course by a specific 

distance. Enter a distance in the distance field, and use the control field to 

turn the alarm on and off.