Garmin 2006 オーナーマニュアル

A

PPENDIX

 > 

C

ARING

 

FOR

 

THE

 GPSMAP 2106/2110

the GPSMAP 2106/2110 unit does not rely on the LORAN signal for navigation, 

it can reference a different GRI chain or secondary stations and still navigate to 

the location stored in memory. The LORAN Position Format field is located on 

the Units sub tab on the Main Menu—System tab. The Loran TD Setup window 

contains the fields to select the LORAN Chain Number, Primary and Secondary 

Stations, and TD Offsets.

1.  Using the 

ROCKER, highlight the System tab, press right on the 

ROCKER to highlight the Units sub tab. Highlight the Position Format 

field, and press 

ENTER.

2.  Highlight 

Loran TD, and press ENTER, and then highlight the Setup 

button to the right, and press 

ENTER again.

3.  To change the settings of any of the five fields, highlight the field, press 

ENTER, select the setting you want, and press ENTER again.

If the active GRI Chain, secondary stations, or offsets were changed since the 

waypoint was created, the waypoint now references the active GRI-chain and 

secondary stations and adjusts the TD coordinates accordingly. Remember that 

the GPS is not relying on the LORAN signal for navigation and actually converts 

the TD coordinate to a useful latitude/longitude coordinate before storing the 

waypoint to memory or using it for navigation. Because of this, the unit can 

navigate to a TD coordinate anywhere in the world.
For more information on LORAN TDs, you can download Garmin’s 

Position Format Handbook from the Garmin Web site.

The GPSMAP 2106/2110 case is constructed of high-quality materials and does 

not require user maintenance except cleaning. 

Clean the unit’s outer casing (except for the screen) using a cloth dampened with 

a mild detergent solution. Wipe dry. Avoid chemical cleaners and solvents that 

may damage plastic components.

The GPSMAP 2106/2110 lens is coated with a special anti-reflective coating 

that is sensitive to skin oils, waxes, and abrasive cleaners. Cleaners containing 

ammonia, alcohol, abrasives, or anti-grease detergents will harm the anti-

reflective coating. It is important to clean the lens using an eyeglass lens cleaner 

that is specified as safe for anti-reflective coatings and a clean, lint-free cloth. 

Do not store the GPSMAP 2106/2110 where prolonged exposure to extreme 

temperatures may occur (such as in the trunk of a car) because permanent damage 

may result. User information, such as waypoints and routes, are retained in the 

unit’s memory without the need for external power. It is always a good practice 

to back up important user data by manually recording it, loading it to a computer 

(transferring it to MapSource), or storing it on a data card.

The GPSMAP 2106/2110

 

is waterproof to IEC Standard 60529 IPX7. It can 

withstand immersion in 1 meter of water for 30 minutes. Prolonged submersion 

can cause damage to the unit. After submersion, be certain to wipe and air dry the 

unit before reuse.