Innovaphone IP110 ユーザーガイド

Manual IP110 Release 6.0

Page 25

In order to use this function, you must assign the Partner function to a function
key. For details on assigning function keys, see Section 4.3, "Programming
function keys", beginning on page 47.

If the active call is signalled through the illuminated partner function key, the call
can be picked up by pressing the function key.

The Pickup List function is used to display all telephones of the group which are
currently ringing and the number of the first caller.
In order to use this function, you must assign the Pickup function to a function
key. For details on assigning function keys, see Section 4.3, "Programming
function keys", beginning on page 47.

Note
Before the Partner function can be used, the configuration of the partners
must be performed in the innovaphone PBX by the administrator

Tip
It makes sense to select the LED blink or LED flicker setting in case of an
incoming partner call and select the setting LED on to indicate when the
partner telephone is engaged.

Tip
The key can be used like an abbreviated dialling key if the line of the set-up
partner is free. The partner is called by pressing the key.

Tip
It makes sense to select the LED blink, LED flicker or LED on setting for
the Pickup list in case of an active call.