Innovaphone IP110 ユーザーガイド

Manual IP110 Release 6.0

Page 47

The four function keys can be programmed individually. The programming
ensues via the Web interface of the IP110.
The function assigned to the key in the current state is executed when it is
pressed. The next defined status is then set for the key, with the effect that the
corresponding function is performed the next time the key is pressed. The pre-
defined functions specified in Table 5 can be assigned to keys.
The following pre-defined functions are available to program the 
function keys:

This function can be used to enter phone 
numbers or copy entries from the 
telephone directory. A call is immediately 
initiated in hands-free mode.

A telephone number can be entered for 
each call diversion type.

The telephone is locked by pressing this 
Function key.

The bell is switched on or off by pressing 
this Function key.

Call waiting is switched on or off by 
pressing this Function key.

Calling line identification presentation is 
switched on or off by pressing this Function 
key.

All telephones of the group currently 
ringing and the number of the caller are 
displayed by pressing the Function key.

A defined joint user can be configured as 
an active user by pressing the Function key.