Kanguru biostor ユーザーガイド

 

- 6 - 

 
 

 
Connecting the drive: 
 
Please note: Windows 98 is the only operating system that requires you to install 
drivers before connecting USB flash drives. All other supported operating 
systems already have the drivers built in to support USB flash drives.  
 

1.  If your computer is not turned on, please do so at this time and wait for 

your operating systems to load. 

 
2.  Connect the included AC power supply and USB cable to the Kanguru 

BioSTOR, and plug it into any USB port on your computer.   

 

3.  Windows 98 Users ONLY: You operating system will ask you to locate 

the drivers for this device. They are located on the mini CD included with 
your drive. To install these driver files, simply direct Windows 98 to that 
folder or select to search your CD-Rom drive for these files. The 
installation wizard should select these driver files automatically and 
complete the installation. A reboot is required for Windows 98 to recognize 
the drive after the installation is complete. 

4.   Check to make sure the drive is recognized by your system.  Under “My 

Computer” you should find a new “Removable Disk” drive as seen below. 

This Removable Disk represents a small piece of flash memory on the 
drive used to store the fingerprint authentication program and your 
passwords.  

Please Note: This Removable Disk does not represent the hard drive of 
the Kanguru BioSTOR. The hard drive portion of this device will appear as 
a new drive letter once the drive has been unlocked. 

1.  Your PC should automatically run the program located in the “Removable 

Disk” drive. If the program doesn’t start right away, you can simply double 
click on the Run.exe program to run it as seen below.