Sonance cabinet lcr インストール手順

ページ / 2
Sonance $ 212 Avenida Fabricante $ San Clemente, CA 92672-7531, USA $ (800) 582-7777 or (949)492-7777 $ FAX: (949) 361-5151 $ Technical Support: (800) 582-0772
2003 Sonance.    Sonance is a registred trademark
c
TECHNICAL ASSISTANCE AND SERVICE
The Technical Assistance Department at Sonance is available at (800)
582-0772 or (949) 492-7777 to answer any questions concerning the
operation and installation of your speakers between the hours of 7:00
AM and 5:00 PM Pacific time, Monday through Friday, except holidays.
In the event your unit should need repair or service, you may return
the unit to your authorized dealer or use the following guidelines:
1. Be prepared to state the model number and / or serial number,
date of purchase and dealer's name and address when calling.
2. Contact Sonance directly at (800) 582-0772 or (949) 492-7777 or
at www.sonance.com
3. If you are returning the product directly to Sonance, call us to
obtain a return authorization number before shipping. YOU MUST
HAVE PRIOR AUTHORIZATION TO RETURN YOUR UNIT.
4. The original packaging must be used. If the original packaging is
unavailable, replacements can be obtained from Sonance for a
small fee.
5. Ship the product via United Parcel Service, Federal Express, or
RPS. Please do not use the U.S. Mail service.
6. Write the return authorization number on the outside of the box.
7. Ship to:
Attn: Quality Assurance Department
Sonance
212 Avenida Fabricante
San Clemente, CA 92672-7531
8. FREIGHT COLLECT SHIPMENTS WILL BE REFUSED !
WARRANTY COVERAGE  ( U.S. ONLY )
EXCLUSIONS AND LIMITATIONS
If, within five (5) years from the date shown on the bill of sale, the unit
fails due to a defect in workmanship or material, Sonance will, at its
option and at no charge, repair or replace the components of such unit
which prove to be defective. For this warranty to be effective, the bill
of sale must show that the unit was purchased from an "Authorized
Sonance Dealer". This warranty shall apply exclusively to the original
purchaser and shall not apply to units purchased for industrial or
commercial use.
Furthermore, this warranty shall not apply if:
1. Damage to the unit was caused by accident, abuse or misuse;
2. The unit was opened, modified, or repaired by unauthorized
personnel; or
3. The unit was not used as outlined in the operating instructions. 
The warranty set forth above is in lieu of all other warranties,
expressed or implied, of merchantability, fitness for a particular
purpose, or otherwise. The warranty is limited to Sonance products
registered herein and specifically excludes any damage to loudspeakers
and other allied or associated equipment which may result for any
reason from use with this product. Sonance shall in no event be liable
for incidental or consequential damages arising from any breach of this
warranty or otherwise. This warranty gives you specific legal rights,
and you may have rights which vary from state to state.
Symphony Cabinet LCR
Tweeter
1" (25mm) Shielded aluminum dome
Woofer
Two - 6-1/2"(165mm) Shielded black glass composite
cones with rubber surrounds
Frequency Response 45Hz - 20kHz  + 3dB
Impedance
8 ohms nominal - 6 ohms minimum
Power Handling
5 - 125 Watts
SPL
90 dB
Grille
Black cloth
Adjustments
3 position tweeter level and woofer boundary
compensation
Dimensions   HxWxD 7-1/2" (191mm) x 22 3/4" (578mm) x 11-3/8" (289mm)
All dimensions include grille
Shipping Weight
26 lbs (11.82 KG) each
WIRE GAUGE AND QUALITY
The total wire resistance should be less than 10% of the speaker
impedance. The Symphony Cabinet LCR is a nominal 8 ohm speaker,
so your total wire resistance should be no more than 0.8 ohms.
In simple terms, the extra resistance from the wire will have a very
negative affect on the sound quality of the speaker. The sound can be
less dynamic, definition of bass frequencies can be reduced, and in
extreme cases, the high frequencies can be attenuated. Amplifier
power is also wasted in the wire, reducing the maximum output level
of the system.
Please refer to the following chart when deciding on the appropriate
wire gauge for your installation.
Wire resistance in Ohms vs. length of cable run
Distance in Feet
50' 100' 150' 200' 250' 300'
.86
.65
.43
.27
.17
.11
18 gauge
16 gauge
14 gauge
12 gauge
10 gauge
20 gauge
1.73
1.30
.85
.54
.34
.22
2.59
1.94
1.28
.81
.51
.33
3.45
2.59
1.71
1.08
.68
.44
4.32
3.24
2.14
1.35
.85
.56
5.18
3.89
2.56
1.62
1.02
.67
11.
375
7.5"
22.7
5"
inc
lud
ing
 gr
ille